Lihlahisoa
MEMS Gauge Module M13 – Tekanyo e nepahetseng bakeng sa Tshebetso e Phahameng
Sebaka sa Kopo
● Nako e khutšoanyane ea ho qala.
● Digital filtering le matšeliso a dikgatotharabololo bakeng sa lisensara.
● Molumo o monyenyane, tšebeliso e tlaase ea matla, boima bo bobebe, sebopeho se bonolo, ho bonolo ho kenya le ho se sebelisa.
Sebaka sa Kopo
● XX mokoetlisi
● Optical botsitso sethaleng
Mekhahlelo ea Ts'ebetso ea Sehlahisoa
| sehlahisoaMohlala | MEMSBoikutloMojule | ||||
| SehlahisoaMohlala | XC-AHRS-M13 | ||||
| Sehlopha sa Metric | Lebitso la Metric | Metric ea Ts'ebetso | Litlhaloso | ||
| Boikutlo bo Nepahetseng | nete hore | 1° (RMS) | |||
| Pitch | 0.5° (RMS) | ||||
| Qheketsa | 0.5° (RMS) | ||||
| gyroscope | Range | ±500°/s | |||
| Sekala se felletseng sa mocheso ha se na moeli | ≤200ppm | ||||
| Ho kopanya | ≤1000ppm | ||||
| Leeme (mocheso o felletseng) | ≤±0.02°/s | (Mokhoa oa naha oa tlhahlobo ea maemo a sesole) | |||
| Ho tsitsa ka leeme | ≤5°/h | (1σ, 10s boreleli, mocheso o felletseng) | |||
| Ho pheta-pheta ho se nang leeme | ≤5°/h | (1σ, mocheso o felletseng) | |||
| Bophahamo ba motlakase (-3dB) | ＞200 Hz | ||||
| accelerometer | Range | ±30g | Boholo ± 50g | ||
| Ho kopanya | ≤1000ppm | ||||
| Leeme (mocheso o felletseng) | ≤2mg | Mocheso o feletseng | |||
| Ho tsitsa ka leeme | ≤0.2mg | (1σ, 10s boreleli, mocheso o felletseng) | |||
| Ho pheta-pheta ho se nang leeme | ≤0.2mg | (1σ, mocheso o felletseng) | |||
| Bophahamo ba motlakase (-3dB) | ＞100 Hz | ||||
| SehokediCbohlasoa | |||||
| Mofuta oa sehokelo | RS-422 | Sekhahla sa Baud | 38400bps(e ka khonahala) | ||
| Sebopeho sa data | 8 Data bit, 1 qala hanyane, 1 stop bit, ha ho cheke e sa itokisetsang | ||||
| Sekhahla sa ntlafatso ea data | 50Hz (e ka tloaeleha) | ||||
| TikolohoAho tenyetseha | |||||
| Boemo ba mocheso o sebetsang | -40℃～+75℃ | ||||
| Sebaka sa mocheso oa polokelo | -55℃～+85℃ | ||||
| Ho thothomela (g) | 6.06gms, 20Hz ~ 2000Hz | ||||
| MotlakaseCbohlasoa | |||||
| Matla a kenang (DC) | +5 VC | ||||
| Ea namaCbohlasoa | |||||
| Boholo | 56mmx48mmx29mm | ||||
| Boima ba 'mele | ≤120g | ||||
Kenyelletso ea Sehlahisoa
E na le theknoloji ea morao-rao ea MEMS, mochine oa lisebelisoa oa M13 MEMS o hlokolosi haholo, o nepahetse ebile o nepahetse. Mojule ona o reretsoe ho sebelisoa mefuteng e mengata ea lisebelisoa tse kenyeletsang lifofane, liroboto, tsa maoatle le indasteri ea likoloi. Ka litekanyo tsa nako ea sebele le li-algorithms tse tsoetseng pele, mochine oa lisebelisoa oa M13 MEMS o ka lemoha hang-hang liphetoho sebakeng sa mojari, ho fana ka boemo bo phahameng ba ho nepahala le kutloisiso.
E 'ngoe ea likarolo tsa bohlokoa tsa module ea lisebelisoa tsa M13 MEMS ke boholo ba eona bo fokolang. Moralo o bobebe, o kopaneng oa mojule o netefatsa hore o ka kopanngoa ntle le seam ho sistimi kapa ts'ebeliso efe kapa efe. Mojule o boetse o na le tšebeliso e tlase ea matla, e etsang hore e be e loketseng ho sebelisoa lisebelisoa tse nkehang kapa tse sebelisoang ke betri. Tšebeliso e tlase ea matla a module e bolela hore e ka sebelisoa nako e telele ntle le ho fetoha ha betri khafetsa kapa ho tjhaja hape bakeng sa boiketlo bo bongata.
Ho phaella moo, M13 MEMS Gauge Module e na le ts'epo e ntle, ho netefatsa hore mojule o ka sebelisoa sebakeng leha e le sefe se thata 'me o khona ho mamella maemo a tikoloho a kang mocheso, mongobo le ho sisinyeha. Mojule o tšoarella ka ho fetelletseng ebile o tsitsitse, o fana ka lintlha tse tšepahalang tsa tekanyo le tlas'a maemo a thata ka ho fetisisa.
Lisebelisoa tsa lisebelisoa tsa M13 MEMS li etselitsoe ho khotsofatsa litlhoko tsa mefuta e mengata e fapaneng ea likopo le liindasteri. Ka matla a eona a ho lekanya ka mokhoa o nepahetseng ka ho fetisisa, mochine ona o loketse ho sebelisoa indastering ea lifofane, moo litekanyo tse nepahetseng li leng bohlokoa bakeng sa ho laola lifofane le tsamaiso ea ho tsamaea. Mojule ona o boetse o loketse mekhoa e tsoetseng pele ea polokeho indastering ea likoloi, joalo ka anti-lock braking, taolo ea botsitso le ho lemoha ho thulana. Ka nako e ts'oanang, mochine oa lisebelisoa oa mM13 MEMS o ka boela oa sebelisoa indastering ea maoatle ho fana ka litekanyo tse tšepahalang bakeng sa ho tsamaea.
- Boholo le Sebopeho li ka Itloaeloa
- Lipontšo li Koahetse Mefuta Eohle ho tloha ho ea Tlase ho ea holimo
- Litheko tse tlaase Haholo
- Nako e Khutšoanyane ea Phano le Maikutlo a nakong
- Lipatlisiso tsa Tšebelisano-'moho ea Likhoebo tsa Sekolo Ntlafatsa Sebopeho
- Own Automatic Patch le Assembly Line
- Own Environmental Pressure Laboratory
